Home of the Ultimate-NAG52 documentation!
The TCU comes bundled with many profiles (All auto profiles are adjustable).
Out of the box, only S and C are enabled. You can enable more under
TCU Settings -> Shifter settings
| Profile | Shifting type | Start gear | Enabled by default? | Allows for adaptations? | Forced shift conditions |
|---|---|---|---|---|---|
| (S)tandard | Automatic | 1st | Yes | Yes | - |
| (C)omfort | Automatic | 2nd | No | Optional* | - |
| (W)inter | Manual | 2nd | No | Yes | 1. RPM too low (Downshift) 2. Engine hit redline (Upshift) |
| (A)gility | Automatic | 1st | No | No | - |
| (M)anual | Manual | 1st | No | Optional* | 1. RPM too low (Downshift) 2. Engine hit redline (Upshift) |
| (R)ace | Manual | 1st | No | No | 1. RPM too low (Downshift) |
(R)ace mode might show up as a blank profile on some clusters. This is totally normal, since
Ris not a supported character for gear profiles on some cluster software versions.
* - Adaptation can occur in these profiles, but is disabled by default under TCU Settings